Canon MP258 Error Codes and How to Fix it

Canon MP258 Error Codes and How to Fix it
MP258 Error Code there are two types of codes, namely:
1. who use the first letter P, eg, P10
2. who use the first letter E, for example E03

Canon MP258 Error Code P:
P02 (Carriage error)
solution:
1. Make sure no foreign objects stuck in roll printers reply.
2. Clean and check encoder, may be subject to splashes of ink.

P03 (Line feed error)
Cause: Timing Disk dirty / damaged.
solution:
1. Check the timing disc sensor to the left of the printer
2. Check and clean the board. 

P05 (ASF sensor error)
Cause: The paper detection sensor Canon MP258 Error.
solution:
Try changing one of the following parts:
• ASF / PE sensor unit.
• Motor.
• Canon MP258 Printer Board. 

P06 (Internal temperature error):
Cause: The hyperbolic heat inside the printer Canon MP258.
solution:
1. Clean the inside of the printer MP258.
2. replace the Board Printer MP258 

P07 (Ink absorber full):
Cause: Ink Counter Full / Full, Printer Canon MP258 reset requested in disposable Software.
Solution: Reset the Canon MP258 Printer using the software

P08 (Print head temperature rise error):
Cause: Head too hot, exceeding the threshold, usually Cartridge color
solution:
Try changing the color catrid Printer Canon MP258.

P09 (EEPROM error)
Cause: Canon MP258 experienced board EEPROM Corrupt or damaged.
solution:
1. replace the Canon MP258 Printer Board.

P10 (Logic Board / Carriage Unit / Cartridge Second Breakdown)
Cause: Cartridge is left empty and used to print on. consequently the heat and there is damage in one of the following components: Logic Board / Carriage Unit / Second Cartridge.
Solution: Replace One of the components above the rank of who most easily and cheaply. Read more HERE

Q15 (Vbus USB over current)
Cause: The printer excess current from the USB cable Canon MP258 Printer.
solution:
1. Try to Change Printer Canon MP258 USB cable.
2. If it is still broken, replace the Canon MP258 Printer Board.

P20 (Other hardware error)
Cause: damage to other hardware
solution:
replace the Canon MP258 Printer Board.

P22 (Scanner Error)
Cause: The scanner does not work 
solution:
1. Replace scanner Canon MP258 printer.
2. Replace Board Printer Canon MP258.

E04: Canon MP258 Cartridge is not installed properly.
Solution: Take the cartridge, plug again

E05: Canon MP258 Cartridge is not installed properly or one catrid some damaged
solution:
1. Take the cartridge, plug again
2. Replace the cartridge if some damaged

E14 and E15: Canon MP258 Cartridge is not installed properly.
Solution: Take the cartridge, plug again

E13 and E16: Ink has run out / cartridge reset request.
solution:
Press the STOP / Reset for 5 - 15 seconds wait until the LED display to proceed.