Error 5200 Early indications:
When iP2770 turned on, the printer looks normal with GREEN LED. But after ordered to print, then the 5200 error will appear, and the green LED will blink alternately green 1x orange 8x ..
When iP2770 turned on, the printer looks normal with GREEN LED. But after ordered to print, then the 5200 error will appear, and the green LED will blink alternately green 1x orange 8x ..
1. The printer is off and plugged the power cord.
2. Press the RESUME button two seconds, then press the POWER button until the green light on (when pressing POWER button, Don't release Resume button)
3. Then release the Resume button, but do not release the button POWER.
4. POWER button while still pressed, press the Resume button 5 times. Led will flash alternately orange glow green with orange last. (not to mistaken 4x because the printer will die completely, but it is temporary as well) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly then will glow GREEN.
7. And the computer will detect new hardware, ignore it ...
8. Press the POWER button, then the printer will off.
9. Press the POWER button again and then the printer will on ... iP2770 Printer is ready to use.
2. Press the RESUME button two seconds, then press the POWER button until the green light on (when pressing POWER button, Don't release Resume button)
3. Then release the Resume button, but do not release the button POWER.
4. POWER button while still pressed, press the Resume button 5 times. Led will flash alternately orange glow green with orange last. (not to mistaken 4x because the printer will die completely, but it is temporary as well) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly then will glow GREEN.
7. And the computer will detect new hardware, ignore it ...
8. Press the POWER button, then the printer will off.
9. Press the POWER button again and then the printer will on ... iP2770 Printer is ready to use.
0 comments
Post a Comment