How to Reset Canon IP2770 Error 5B00

First, Download Restter canon iP2770 v1074 : Click here to download IP2770 Resetter
Don't forget to turn off download manager to download this file

Enter into Service Mode iP2770:

1. The printer is turned off and plugged the power cord.
2. Press the RESUME button two seconds
then press the POWER button until the green light flash (when pressing the POWER button, Resume button ... not released yet)
3. Then release the RESUME button, but do not release the POWER button.
4. POWER button while still depressed, press the Resume button six times. Led will light turns green with orange flames last green. (do not be mistaken because the printer would die 4 times total, but temporary, too) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly then will glow GREEN.
7. The computer will detect the new device, ignore it .....
8. This situation is shown in a state iP2770 printer SERVICE MODE and ready to be reset.

Then run, iP2770 Resetter v1074:
1. Exctract File Resetter iP2770.
2. Prepare two paper in the printer (to print at the time of the reset).
3. Run the program Resetter iP2770
4. Click the "MAIN", then the printer will proceed, then the iP2770 will print one page with the words "D = 000.0"
5. Click "EEPROM Clear".
6. Then click "EEPROM", and the printer will print the result Resetter iP2770. Writing one row as follows:
"TPage (TTL = 00 000)"
7. Turn off the printer by pressing the POWER button.
8. Done ...