How to reset Canon IP1200, IP1300, IP1600, IP1700

Maybe you've had canon printer IP1200, IP1300, IP1600, IP1700 you are wearing suddenly can not print. And indicator lights flicker or blink.

Canon IP1200, IP1300, IP1600, IP1700 need to be reset in the event of:
1. Blink 4x orange 1x green (this blink specifically to handle read HERE)
2. Green flashes orange alternately during the 7x (Ink Absorber Full), and
3. Orange 8x ink tank full

 

Here are the steps to reset IP1200, IP1300, IP1600, IP1700:
1. Driver must already be installed. If you do not have a driver click here.
2. The printer should be in service mode (temporary reset).

To activate the service mode:

* Unplug the electrical power
* Press the power (on the printer)
* Electric power plugs (light is green)
* While pressing the power press the reset button (light turns orange)
* Remove both (the printer will off)
* Press the power button again and release directly. (Light is green) (do not unplug the electrical power)

3. Run the IP Tool. If you do not have, download it here.
4. Follow the picture below .....

 

5. Disconnect electric power, plug back in and turn (initial printer / wait until the lights blink. Done. Easy right!

Good luck ......