I will explain How To Reset Waste Ink Counter Canon MP145, MP150, MP160. Canon printer MP145, MP150, MP160 that need to be reset and will appear the following signs: ie the segment LED 7 will display Error Code E8 or E27.
here's how to reset it:
1. Turn off the printer (make sure the power cord still attached), press and hold STOP / RESET button, then press and hold ON /OFF and release STOP / RESET button (ON / OFF should not be removed, then press the STOP / RESET 2x
2. Release both buttons at once, and now the printer in the position of SERVICE MODE (on the printer LCD will show the number "0")
3. After the lights on / off the green and the LCD lights up the numbers 0, please press the STOP / RESET accordance withthe following instructions:
in press 1x = Orange flame lights> for pattern testprint Service
in press 2x = green lights flash> for EEPROM testprint
in press 3x = Orange flame lights> for EEPROM reset
in press 4x = Light Green Flame> for the Waste ink counter reset
If the Canon MP145, MP150, MP160 and its E27 error, then choose 4x press the STOP / RESET.
4. Press the ON / OFF 2x, then the printer turns off, and unplug the POWER.
5. Replace the Power Cable and Turn on your printer again.Done ...
Good luck .........
0 comments
Post a Comment